Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 MAY 2009MMC: 300CID TO SLT: System provides Caller ID to SLT.NO RCL FLASH: If ON and an SLT hook flashes and does not dial and hangsup, then the call will disconnect. If OFF the call will recall. Thesame applies if a keyset transfers and hangs up withoutdialling a station. Typically not used in the US market.RBK STN NAME: If ON, the called station’s name is displayed while ringing(Intercom calls only).GLISTEN SPKR When set to ON for a station, that station may turn the GroupListen feature on by pressing the speaker key at any timeduring the call. This will cause the call to be heard throughthe handset or headset as well as the speakerphone.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRANSFER 300Display shows[201] CUS.ON/OFFACCESS DIAL :ON2. Dial station number (e.g., 205)OR[205] CUS.ON/OFFACCESS DIAL :ONPress UP or DOWN to select stationORPress ANS/RLS for all and press RIGHT softkey to move cursor.[ALL] CUS.ON/OFFACCESS DIAL :ON3. Press UP or DOWN to select feature andpress RIGHT soft key to move cursor.[ALL] CUS.ON/OFFACCESS DIAL :ON4. Dial 1 for ON or 0 for OFFOR[ALL] CUS.ON/OFFACCESS DIAL :OFFPress UP or DOWN to select and pressRIGHT soft key.