Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 JANUARY 2009MMC: 863 ACCESS NUMBERDESCRIPTION:This MMC is the program that specifies the system information of SPNet (SamsungProprietary Networking). It is useful when many systems are connected throughSPNet and interlocked with LCR. There are a maximum of 2000 entries.Option Description0 ACCESS NUM Other system’s ID1 IP ADDR Other system’s ID address2 TEL NUMBER Rerouting Trunk Number (excluding VoIP TrunkNumber). If SPNet function is not working, call isrerouted through this trunk.3 MAX COUNT If you dial a valid digit string until Max Count number,the system set up call.Note: SPNet is VoIP network function developed by Samsung and it is not standardfunction.Conditions:LINK ID should not be inputed in MMC 820 SYSTEM LINK ID and ACCESSNUMBER & TELEPHONE NUMBER should be input in the LCR table.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCACTION DISPLAY1. Press TRANSFER 863.Display shows.[0001] ACCESS NUM2. Enter the node entry numberOR[0001] ACCESS NUMPress VOLUME button to select and pressRight soft button to move cursor.3. Enter the option numberOR[0001] ACCESS NUM