OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 845 WLAN PARAMETERSDESCRIPTION:This program provides detail parameters for WLAN settings.No. Parameter Description01 CODEC LIST CODEC used in a wireless VoIP callCurrently it set to G.72902 RF CHANNEL RF Channels used in the system must match with APs.03 VERSION Indicates the WLAN module version04 MAX AP CH Maximum channel per AP05 WLANSWITCHEnable or disable the use of WLAN switchAccording to the AP type, CWBS is displayed if WBS24 is set to Combo, and BWBSif set to Basic on the LCD display. The AP type can be set in [AP TYPE] of [MMC849].Normally, use the default without change.No. Parameter Description1 GEN NO RESP Waiting time before canceling the SIP Request.2 INV NO RESP Waiting time before canceling the SIP INVITE Request.3 REQ RETRY Waiting time before the final response to the SIP Request is received.4 PROVISIONAL When receiving the Provision Response, User Agent should waitduring this time before Timeout expires.5 RE-TRANS T1 When using Unreliable transmission protocol such as UDP,retransmission is performed if there is no response after transmission.RE-TRANS.T1 TIME is the Initial Retransmission Interval defined inRFC2543.6 RE-TRANS T2 Maximum Retransmission Interval defined in RFC 2543.7 RE-TRANS T4 Available for multiple purposes in RFC 2543. This parameter is usedas time when User Agent Server(UAS) receives the ACK messageand waits in the Unreliable transmission protocol.
