Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 JANUARY 2009MMC: 764 DISA PASSWORDDESCRIPTION:This is the program to enable the DISA incoming call without entering the DISApassword according to the CID number of the incoming call to the DISA trunk line.It is available to designate 500 CID numbers, and if the DISA call is received to theCID number corresponding to the entered CID number, it is available to make a callwithout entering the password althought MMC 210 DISA PASSWORD is designatedas ON.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryACTION DISPLAY1. Press TRANSFER 764.Display shows.DISA PASS [001]CLI:2. Enter the table number ([001]-[500])Otherwise, select the table number byDISA PASS [001]CLI:using the VOLUME button. Move the cursorby pressing the RIGHT soft key.3. Enter the CID number within maximum of 16digits and move the cursor by pressing theDISA PASS [001]CLI:1234RIGHT soft key.4. Press TRANSFER to exitORPress the SPEAKER key to exit and advance tothe next MMC.DEFAULT DATA: NONERELATED ITEMS: MMC 210 CUSTOMER ON/OFF PER TENANTMMC 410 ASSIGN DISA TRUNK