Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 MAY 2009MMC: 329 RING GROUPDESCRIPTION: [Available Only with v.4.30 or Higher]This MMC is used to configure OfficeServ Connect groups. These groups allow youto set up to 5 devices to ring simultaneously with the station. These devices can beDLI, SLI, SIP, ITP, WIP, or MOBEX ports. Calls will follow the forwarding of the primarystation only. These groups are primarily used by the MOBEX feature to allow calls toring to both a keyset and a cell phone at the same time.NOTE: Calls are delivered to all 5 devices simultaneously, however MOBEX ports willexperience a slight delay as the system must access and dial a trunk in orderto ring the cell phone. This delay typically 10 seconds or less.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKERUsed to store data and advance to next MMCHOLD Used to clear previous entryACTION DISPLAY1. Press TRANSFER 329.Display shows first station port.[2001]RING GROUPMEMBER 1 :NONE2. Press UP or DOWN to select a stationOR[2001]RING GROUPMEMBER 1 :NONEPress RIGHT soft key to set members3. Press UP or DOWN to select a memberOR[2001]RING GROUPMEMBER 1 :NONEPress RIGHT soft key to set member directorynumber4. Press UP or DOWN to select next stationOR[2001]RING GROUPMEMBER 1 :4300Press TRANSFER to exit programmingDEFAULT DATA: NONERELATED ITEMS: OFFICESERV CONNECT FEATURE