Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 72510. CALLER ID† DATA This option can be selected to print Caller ID datareceived from the Central Office on incoming calls. Thisoption requires the use of a 132 column (wide carriage)printer or an 80 column printer set for condensed print.11. ABANDON CALL† If this option is set to YES, unanswered calls for which CIDinformation was received will print on SMDR.12. NO. OF DIAL MASK If this option is set to a numeric value, the selected lastdigits of the number dialed field will be masked asasterisks (*) on the SMDR print out. Maximum maskeddigits is 18.13. INCOMING ANSWER If this option is set to YES, the duration of calls ringingbefore answered will print on SMDR.14. INTERCOM CALL If set to YES intercom calls will print on SMDR.15. KEY MMC IN/OUT If set to YES then the SMDR record will showprogramming being opened and closed in MMC 200 andMMC 800.16. HOTEL CALL COST This option determines if the cost of the Hotel Room willbe presented on the SMDR printout (NOT USED IN USA).17. HOTEL PAGE FEED This option determines at which point, the printer willperform the page feed function (NOT USED IN USA).18. HOTEL START LINE This option determines the point at which the system willbegin counting, to determine which line to begin printingreports (NOT USED IN USA).19. ITP REGISTRATION: When set to YES, whenever an ITP set registers with thesystem the SMDR record will show the station number inthe EXT field and the IP address and signalling port in theACCOUNT field.19. SET RELOCATION: When set to YES the SMDR record will print set relocationactivity. One station number will print in the EXT field andthe other station number will print in the ACCOUNT field.