Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 7143. PRI = DID priority option. There are 9 priority levels: priority 1 is the highest andpriority 9 is the lowest.When calls arrives into a station group and group members are all busy the call isqueued. The system will assign a priority to the DID number so that calls from ahigh priority DID number will be placed at the front of the group queue.4. 1: XXX, 2: XXX, 3: XXX, 4: XXX, 5: XXX, 6:XXX = ring plan and destination duringeach ring plan. The destination can be a station, station group, trunk or trunkgroup. If trunk or trunk group is selected the trunks must be programmed as E&Mtrunks to allow the received digits to be re-sent on the facility(s). This is referred toas DID Repeat digits over tie line.NOTE: An entry of the character “B” means to repeat the received digits.5. CW: Call waiting Yes/No . Allow a second DID call to be received6. MC: This is the maximum number of simultaneous calls to this DID the system willallow. If more call attempts are made the system will return a busy signal to thecaller.7. DC: The number of digits to delete. This is useful with Tandem switching, mixednumbering plans and DID Repeat digits over tie line. Maximum number of digitsthat can be deleted is 16.8. NAME: Input up to 11 characters to identify call.Names are written using the keypad. Each press of a key selects a character.Pressing the dial pad key moves the cursor to the next position. For example, ifthe directory name is “SAM SMITH,” press “7” three times to get the letter “S.”Press “2” once to get “A.” Continue selecting characters from the table below tocomplete your message. Pressing the bottom left programmable key changes theletter from upper case to lower case.NOTE: When the character you want appears on the same dial pad key as theprevious character, press the UP key to move the cursor to the right.9. TONE: Ring tone options for a specific DID number (No. 1~8).10. CAD: Ring cadence options for a specific DID number at SLT’s (No. 1~5).