Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 MAY 2009MMC: 724 DIAL NUMBERING PLANDESCRIPTION: [Applies to v.4.30 or Higher]This MMC allows the technician to change directory numbers for stations, trunks,station groups, trunk groups and feature access codes. The system can bepreprogrammed with a default three or four digit numbering for station, stationgroups and trunk numbers depending on the position of the DIP switches on theMP10 or MP10a card. Default numbering plan is only assigned once the system ispowered up for the first time OR once the system memory has been manuallycleared. There is an error message provided to prevent the accidental duplicationof a directory number or feature access code.DIAL OPTION DESCRIPTION0 STN NUMB.This is where DLI, SLI, Virtual DLI (VDL), Virtual SLI(VSL), ITP, WIP, and SIP Station directory numbersare changed or assigned1 TRK NUMB.This is where Analog (TRK), PRI, SPNET (NET),SIP, and H.323 (323) trunk directory numbers arechanged or assigned2 VMAA NUMB. This is where the embedded SVM directory numbersare changed or assigned3 MISC NUMBThis is where directory numbers for relays, MOHports, and the Internal Modem are changed orassigned4 MGI NUMB. This is where the MGI port directory numbers arechanged or assigned.6 MOBEX NUMThis is where MOBEX directory numbers arechanged or assigned.NOTE: MOBEX ports are paired internally, meaningthat it is only necessary to number the odd-numbered MOBEX ports (e.g. 1, 3, 5, 7)7 GROUP NUMBERThis is where station group and trunk groupdirectory numbers are changed or assigned. Stationgroups are denoted by a SGR prefix and Trunkgroups are denoted by a TGR prefix.