Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 MAY 2009MMC: 861 SYSTEM OPTIONDESCRIPTION: [Applies to v.4.30 or Higher]This MMC is used to set various system wide options. The list below describes eachoption’s purpose.OPTIONS0 AUTO UPDATE TIME NOT FOR USE IN THE USASYSTEM SPEED BIN This option determines the maximum numberof system speed dial numbers. When set to thedefault, MAX 500, the system will have amaximum of 500 system speed dial binsnumbered 500 to 999. When set to MAX 950the system will have a maximum of 950 systemspeed dial bins numbered 050 to 999. Stationspeed dial bins will be 000 to 049.NOTE: Personal speed dial numbers changefrom 2 to 3 digits when MAX 950 is selected.IDLE WHEN ENBLOCK This option determines the idle status for 2 lineITP keysets that are dialling in ENBLOCKmode. When enabled ITP-5121D and ITP-5107S keysets that are dialling when anincoming call is received will have diallingcancelled to present the ringing call. Whendisabled incoming calls will not disrupt dialling.Note: This option has no effect if 2LINEENBLOCK below is set to DISABLE.2 LINE ENBLOCK When this option is enabled the ITP-5121Dand ITP-5107S keysets must press the SENDbutton after dialling to place a call. Thisoperates like a cell phone. When disableddigits are sent as dialled with no need to pressSEND.SPNET OVERLAP NOT FOR USE IN THE USA