Ubigate iBG2016 Configuration Guide/Ed.00© SAMSUNG Electronics Co., Ltd. 109Configuring Loopback InterfaceConfiguring StepStep Command Purpose1 iBG2016/configure# interfaceloopback loEnters the loopback interfaceconfiguration mode.2 iBG2016/configure/interface/loopbacklo# ip address [IP address] { [bitmask] | [number of bits for mask] }Sets the looback interface ipaddress.3 iBG2016/configure/interface/loopbacklo# [Bundle name]# exitReturns to the upperconfiguration levelConfiguring ExampleThe following example shows the commands used to configure the bundleinterface.iBG2016/configure# interface loopback loiBG2016/configure/interface/loopback lo# ip address 1.1.1.1 32iBG2016/configure/interface/loopback lo#exitiBG2016/configure#Configuring OSPFConfiguring StepStep Command Purpose1 iBG2016/configure# router-id[loopback interface ip address]Sets the router ID. iBG2016utilizes its loopback address forthe router ID.2 iBG2016/configure# router ospf[Process ID]Sets OSPF Process ID. ProcessID ranges from 0 to 655353 iBG2016/configure/router/ospf#network [IP address]/[number of bitmasks] area [Area ID]Sets OSPF network. Area ID isan ip address or an integer valuefrom 0 to 42949672954 iBG2016/configure/router/ospf# exit Returns to the upperconfiguration level
