CHAPTER 2. VoIP Gateway Management328 © SAMSUNG Electronics Co., Ltd.The common matters regarding Voip Gateway will be discussed in this section,and the details of working as SIP and H.323 gateway will be described in thenext section,Configuring VoIP GatewayConfiguring VoIP BindThis section describes the VoIP bind feature. With this feature, you can specifythe source address of SIP and H323 signaling, and the source address formedia stream as well. You can specify the interface by Bind command orspecify the IP address directly by host ip-address command.Restrictions for VoIP BindThe interfaces which you can specify as the source address of VoIP signalingand media stream via Bind command are ethernet, bundle and loopback.Prerequisites for VoIP BindYou must shut down the VoIP service before executing Bind command or hostip-address command. To execute the Bind command, it is necessary to set IPaddress first to the interface to bind.How to Configure VoIP Bind1. setting the IP Address of the interface to be boundThis procedure should be executed first before executing the bind command.y Configuration Steps− configure terminal− interface− ip address− exity Detailed Steps
