CHAPTER 3. SIP Gateway Management356 © SAMSUNG Electronics Co., Ltd.(Continued)No. Rec Description20 Draft-ietf-sipping-conference-package-10A SIP Event Package for Conference State21 Draft-ietf-sip-history-info-06An Extension to the SIP Request History Information22 draft-ietf-mmusic-sdescriptions-11Session Description Protocol Security Descriptions forMedia StreamsConfiguring Basic SIP GatewayConfiguring SIP BindThis section describes the SIP bind feature. With this feature, you can specifythe source address of SIP signaling, and the source address for media streamas well. You can specify the interface by Bind command or specify the IPaddress directly by host ip-address command.Restrictions for SIP BindThe interfaces which you can specify as the source address of SIP signalingand media stream via Bind command are ethernet, bundle and loopback.Prerequisites for SIP BindYou must shut down the VoIP service before executing Bind command or hostip-address command. To execute the Bind command, it is necessary to set IPaddress first to the interface to bind.How to Configure SIP Bind1. setting the IP Address of the interface to be boundThis procedure should be executed first before executing the bind command.y Configuration Steps− configure terminal− interface− ip address− exity Detailed Steps
