Ver.CHAPTER 4. AP Connection Management© SAMSUNG Electronics Co., Ltd. page 159 of 4962600-00FK1RGA4 3.0[select-package]Configure a package to use during AP upgrade. select-package [UPGRADE_TYPE] [FILE_NAME]Parameter DescriptionUPGRADE_TYPE Configures upgrade type (default/quick-upgrade/predownload)- default: AP image that is referred to during provision upgrade.- quick-upgrade: AP image that is referred to for entire AP upgradeupon an operator’s request.- predownload: AP image that is referred to download AP image toAP during entire AP upgrade.FILE_NAME Image file name that will be used for AP upgrade[target]During entire upgrade, you can select whether to maintain individual configured APversion of an AP or perform upgrade. Target [AP UPGRADE TARGET]Parameter DescriptionUPGRADE TARGET Upgrade target (all/ keeping-individual)- all: Perform upgrade for all the APs. (default)- keeping-individual: While maintaining individually configured apversion, perform upgrade for the rest APs.[transfer-protocol]Selects a transmission protocol that is used to transmit the package file of an AP from theWEC8500 to the AP. Transfer-protocol [AP TRANSFER MODE]Parameter DescriptionTRANSFER_MODE File transmission protocol (ftp/sftp)- ftp: ftp is used for file transmission.- sftp: sftp is used for file transmission.
