Ver.CHAPTER 4. AP Connection Management© SAMSUNG Electronics Co., Ltd. page 160 of 4962600-00FK1RGA4 3.0[max-download]Configures the maximum number of simultaneous downloads when transmitting thepackage file of an AP from the APC to the AP. Max-download [COUNT]Parameter DescriptionCOUNT Maximum number of simultaneous downloads of AP imagefile (range: 1-50, default: 10)[max-retry]Configures maximum number of re-attempts when AP upgrade is failed. Max-retry [COUNT]Parameter DescriptionCOUNT Maximum number of AP upgrade re-attempts(range: 1-10, default: 3)[start]Provides the entire AP upgrade function. start [UPGRADE_TYPE]Parameter DescriptionUPGRADE_TYPE Configures upgrade type (quick-upgrade/predownload)- quick-upgrade: Perform entire ap upgrade upon anoperator’s request.- predownload: Download ap image to ap first during entireap upgrade.If you perform package upgrade after configuring ap upgrade type to predownload, restartall the APs in the following methods.WEC8500# configure terminalWEC8500/configure# ap-allWEC8500/configure/ap-all# reboot upgrade[stop]Provides the function of stopping the image upgrade of all the APs. stop[show ap upgrade]To check the upgrade information of an AP, use the following command. show ap upgrade summary
