Ver.CHAPTER 5. WLAN Management© SAMSUNG Electronics Co., Ltd. page 176 of 4962600-00FK1RGA4 3.0Configuration using Web UIIn the menu bar of , select and then select the menu in the sub-menus. Select a WLAN ID to change in the WLANs screenand go to the tab.Figure 83. Initialization of WLAN security functionThe configuration items available in the window are as follows.Item DescriptionPROFILE NAME A WLAN configuration name is displayed.L2 SECURITY TYPE Layer2 security function type- None: Security function disabled (Select this to initialize theWLAN security function.)- Static WEP: Static WEP security function- 802.1x (Dynamic WEP): Dynamic WEP security function- Static WEP + 802.1x (Dynamic WEP): Static/Dynamic WEPsecurity function- WPA + WPA2: WPA/WPA2 PSK/802.1x security functionWPA POLICY WPA WPA Version 1 function is enabled when selectedENCRYPTIONTYPEEncryption type- TKIP: TKIP type- CCMP: AES-CCMP type- Both: TKIP, AES-CCMP typeWPA2 POLICY WPA2 WPA Version 2 function is enabled when selectedENCRYPTIONTYPEEncryption type- TKIP: TKIP type- CCMP: AES-CCMP type- Both: TKIP, AES-CCMP typeAUTH KEYMGMTPSK/802.1x Authentication key management type- PSK: PSK (shared key) authentication type- 802.1x: 802.1x authentication type through a RADIUSserverPSK FORMAT PSK key input type- ASCII: ASCII character string- HEX: Hexadecimal valuePSK KEY PSK key- 8-63 ASCII character string- 64-characters of hexadecimal value
