Ver.CHAPTER 10. System Management© SAMSUNG Electronics Co., Ltd. page 347 of 4962600-00FK1RGA4 3.010.5 Managing Traffic PerformanceYou can manage the traffic performance statistics information and accumulated data for theAPC system and the interface of each AP.10.5.1 Managing History InformationWhen the traffic performance information management is enabled, the APC system createshistory information at every 5 minute. But, if the FTP server information is not configured,the history information is not transmitted to outside although it is created.Collecting information1) Go to configure mode of CLI.WEC8500# configure terminalWEC8500/configure#2) Configure the traffic performance information.WEC8500/configure# stats-report enable3) Configure a FTP server to transmit history information. stats-report target ip [IP_ADDRESS] port [PORT_NUMBER] id [ID] password[PASSWORD] path [PATH]Parameter DescriptionIP_ADDRESS IP address of a target serverPORT_NUMBER Port number of a target serverID User ID of a target serverPASSWORD User password of a target serverPATH File storage path of a target server4) To check the information of traffic performance information management, use the‘show stats-report conf’ command.5) Configure so that the performance information is uploaded to the FTP server.But, because the default is the ‘start’ status, this step may be skipped.WEC8500/configure# stats-report upload start
