Ver.CHAPTER 5. WLAN Management© SAMSUNG Electronics Co., Ltd. page 165 of 4962600-00FK1RGA4 3.0WEC8500# configure terminalWEC8500/configure# ap-group apg_01WEC8500/configure/ap-group apg_01# add-wlan 13) Configure an interface group to which the WLAN service will be provided.Several VLAN interfaces can be added to an interface group, and the WLAN service isavailable only through the interface.. if-group [INTERFACE_GROUP_NAME]4) Configure a SSID. The SSID is an ID used to connect to each wireless terminal toprovide the WLAN service.Make sure to configure a SSID to use the WLAN service. ssid [SSID_NAME]5) Configure whether to apply the WLAN service.WEC8500/configure/wlan 1#enableTo apply the various WLAN services to multiple wireless terminals, create theWLAN service in a profile format. Once the WLAN service is started, make eachAP use the WLAN service by downloading the profile.Configuration using Web UIIn the menu bar of , select and then select the menu in the sub-menus. Select a WLAN ID to change in the WLANs screenand go to the tab. In the screen, you can use various functions such as adding ordeleting a WLAN.Figure 76. WLAN basic configuration (1)
