Ver.CHAPTER 7. WLAN Additional Services© SAMSUNG Electronics Co., Ltd. page 257 of 4962600-00FK1RGA4 3.0ENABLE : YESOWN-APC-INDEX : 1========================================================[Adding APC to APC List]To add an APC to the cluster, the APC must be added to the APC list first. APC informationis automatically added to the APC list.1) Go to apc-list configure mode of CLI.WEC8500# configure terminalWEC8500/configure# apc apc-listWEC8500/configure/apc/apc-list#2) Add the APC to the APC list. add-apc [APC_NAME] [MAC_ADDRESS]Parameter DescriptionAPC_NAME APC name to be added to the APC listMAC_ADDRESS MAC address of the APC to be added to the APC list(system mac address output parameter value of the ‘showsystem info’ command in the APC)[Adding APC to cluster]After adding APC to the APC list, the APC must be added to a cluster.1) Go to configure mode of CLI.WEC8500# configure terminalWEC8500/configure#2) Add the APC to a cluster. cluster add-apc [INDEX] [APC_NAME] [IPV4_ADDRESS] [DB_REFRESH_INTERVAL]Parameter DescriptionINDEX Index in cluster (range: 1-12)APC_NAME APC name (maximum 18 characters)IPV4_ADDRESS IPv4 addressDB_REFRESH_INTERVAL Database update interval (Unit: s, range: 60-5000, default: 120)
