Ver.CHAPTER 8. Security© SAMSUNG Electronics Co., Ltd. page 292 of 4962600-00FK1RGA4 3.02) Configure the unauthorized client detection option by using the following command. [OPTION] [NOTI_TYPE]Parameter DescriptionOPTION Rogue Client detect optionNOTI_TYPE Event save option- Alarm: Notify the state with alarm- Log: Save the state with sys logThe description of OPTION parameter is as follows:Parameter Descriptionassoc-fail-det Classifies a client that exceeds the association fail thresholdas an unauthorized client.auth-fail-det Classifies a client that exceeds the authentication failthreshold as an unauthorized client.auth-request-det Classifies a client that exceeds the authentication requestthreshold as an unauthorized client.deauth-request-det Classifies a client that exceeds the de-authentication requestthreshold as an unauthorized client.exclusion-list-check Classifies a MAC that does not exist in the client blacklist asan unauthorized client.oneXauth-fail-det Classifies a client that exceeds the 802.1X authentication failthreshold as an unauthorized client.oui-list-check Classifies an OUI that does not exist in the OUI list white listas an unauthorized client.probe-request-det Classifies a client that exceeds the probe request thresholdas an unauthorized client.webauth-fail-det Classifies a client that exceeds the WEB authentication failthreshold as an unauthorized client.3) To check the changed configuration, use the following command. show wids rogue client current-config
