Ver.CHAPTER 6. Wi-Fi Configuration© SAMSUNG Electronics Co., Ltd. page 212 of 4962600-00FK1RGA4 3.06.2 Wi-Fi QoS ConfigurationThe APC provides various QoS in the wire/wireless section for every packet type (voice,video, best-effort, or background). The QoS can be configured for each wireless section(2.4 GHz, 5 GHz).6.2.1 QoS Configuration of Wireless TerminalThe system provides probable QoS by changing the Enhanced Distributed Channel Access(EDCA) parameter in a wireless section.Configuration using CLITo configure an EDCA profile in the upward wireless section of a wireless terminal,execute the command as follows:1) Go to configure radio mode to configure of CLI.APC# configure terminalAPC/configure# [80211a/80211bg]2) Apply the EDCA profile. edca-parameters [PROFILE] stationParameter DescriptionPROFILE Configures each EDCA profile (wmm_default_sta/wmm_default_ap/edca_user1/edca_user2).3) To check the application status of a configured EDCA profile, use the ‘show 80211a[|80211bg] qos edca-parameters wmm_default_sta’ command.Configuration using Web UIIn the menu bar of , select and then select the <802.11a/n> or <802.11b/g/n> menu in the sub-menus.In the Qos menu, there are Wired and Wireless tab. To change the Station EDCA parameter,select the Wired tab. If you want to change the AP EDCA parameter to configure the QoSof an AP wireless section, select the Wireless tab.
