WEC8500/WEC8050 (APC) Operation Manual v10.1 204©Samsung Electronics AmericaFigure 142. WLAN Basic Configuration (2)You can configure various functions such as interface group and SSID, and so on.The configurations available in the General tab are as follows:• INTERFACE GROUP: Configures an interface group.• RADIO AREA: Configures a radio area.• CAPWAP TUNNEL MODE/LOCAL VLAN: Configures the local switchingfunction.• SUPRESS SSID: Enables or disables the function.• AAA OVERRIDE: If the WLAN is enabled with the device authenticationfunction using an AAA server, the AAA-override function can be enabledso that the user-specific settings configured in the AAA server areapplied with priority over the APC settings.• MAXIMUM ALLOWED STATIONS: Limits the number of users perWLAN.• ADMIN STATUS: Enables or disables the function.WLAN Additional ConfigurationEach wireless terminal can receive a differentiated service according to the WLANconfiguration. The procedure of configuring the WLAN additional function is as follows:Configuration using CLI1 Go to configure wlan configuration mode of CLI.WEC8500# configure terminalWEC8500/configure# wlan 1WEC8500/configure/wlan 12 If the WLAN is enabled with the device authentication function using anAAA server, the AAA-override function can be enabled so that the user-specific settings configured in the AAA server are applied with priority
