WEC8500/WEC8050 (APC) Operation Manual v10.1 430©Samsung Electronics AmericaFTP/sFTPThe FTP is a network service for file transmission. The APC support the client and serverfunction for FTP and sFTP (Secure FTP).Configuration using CLI[SFTP Server Configuration]The secure FTP server configuration is as follows:1 Go to the configure mode of the CLI.WEC8500# configure terminal2 Enable or disable the sFTP server.o sftp-server enable: Enableo no sftp-server enable: Disable3 Enter as follows to change a user’s ID and password.o sftp-server chguser [ID] [PASSWORD]Parameter DescriptionID User ID of a serverPASSWORD User password of a server (alphabet/specialletters/number combination, more than 8 characters)4 To check the status of sFTP server, enter the ‘show sftp-server’command.[FTP Server Configuration]1 Go to the configure mode of the CLI.WEC8500# configure terminal2 Enable or disable the sFTP server.o ftp-server enable: Enableo no ftp-server enable: Disable3 Enter as follows to change a user’s ID and password.o ftp-server chguser [ID] [PASSWORD]Parameter DescriptionID User ID of a serverPASSWORD User password of a server (alphabet/specialletters/number combination, more than 8 characters)4 To change the idle timeout, enter the command below. The unit oftimeout is minutes and the default value is 15 minutes.o ftp-server idle-timeout [timeout]
