WEC8500/WEC8050 (APC) Operation Manual v10.1 424©Samsung Electronics AmericaChapter 9 IP ApplicationIn this chapter, the IP application functions available in the APC and each configurationmethod are described.DNSThe DNS is a network service that interprets a domain or host name into an IP address.The APC gets DNS information from a DNS server and provides the DNS relay functionthat relays the DNS server and a client. If a wireless terminal connected to the APCconfigures the APC as a DNS server, it can receive the DNS service.If a DNS server is connected to the APC and a DNS proxy is configured, a stationconnected to the APC can receive the DNS service by configuring the APC as a DNSserver.DNS Client ConfigurationConfiguration using CLI1 Go to the configure mode of the CLI.WEC8500# configure terminal2 Configure a DNS client.o ip dns client enable: Enableo no ip dns client enable: Disable3 Configure a DNS server to which DNS will be requested. You can entermaximum 3 DNS server each that is IPv4 and IPv6 addresses.o ip dns name-server [A.B.C.D/A:B:C::D]: Configures a DNS server.o no ip dns name-server [A.B.C.D/A:B:C::D]: Deletes a configured DNSserver.Configuration using Web UIIn the menu bar of ow>, select and then select the<DNS> menu in the sub-menus.
