WEC8500/WEC8050 (APC) Operation Manual v10.1 19©Samsung Electronics AmericaChapter 2 Basic SystemConfigurationIn this chapter, the basic system configuration using web and Command Line Interface(CLI) is introduced and how to use CLI and Web UI is described.Basic System ConfigurationCLI ConnectionConnecting to APC using CLI is as follows:• Direct connection to the system console port• Telnet or SSH connection through an Ethernet portWhen the booting of APC is completed, log into the system as follows:1 For the first connection, log in using ID: ‘samsung’ and Password:‘samsung’.USERNAME : samsungPASSWORD : samsungTHIS IS YOUR FIRST LOGIN AFTER USER ACCOUNT HAS BEEN CREATED.YOU MUST CHANGE YOUR PASSWORD.ENTER LOGIN PASSWORD : samsungENTER NEW PASSWORD : ********CONFIRM NEW PASSWORD : ********PASSWORD SUCCESSFULLY CHANGEDWEC8500 #2 After the first login, you must change the password. Use the changedpassword for the next login. New password must be more than 8characters and contain at least one alphabet/numeric/special letters.The default ID of APC is set to ‘samsung’ that has an administrator privilege.Managing Operator AccountAn operator who has an administrator privilege (level 1) can create or delete a newoperator account. When creating an account, specify the account’s privilege level (level 1-4).To set up operator account related functions, go to configure mode by executing thefollowing command:WEC8500# configure terminal
