WEC8500/WEC8050 (APC) Operation Manual v10.1 473©Samsung Electronics AmericaConfiguration ManagementThe APC supports the following functions for configuration management.• Saves the current configuration information.• Exports/imports the current configuration information (import/export).• Initializes systemConfiguration using CLI[Save Configuration Information]To save the current configuration information in the system, execute the command asfollows:WEC8500# save local[Export Configuration Information]To transmit the current configuration information in the system to outside, execute thecommand as follows: When you execute the command, the configuration information iscompressed into the entered ‘FILENAME’ as a file.WEC8500# export [FILENAME][Import Configuration Information]In addition, to apply a file (‘FILENAME’) from outside to the current system, execute thecommand as follows:WEC8500# import [FILENAME][Periodic backup configuration Information]Execute following command to transfer configuration information to ftp/sfpt server.filename: System MAC_Package Version_backup time.wec8500.config [wec8050.config]1 Enter to CLI periodic-backup mode.WEC8500# configure terminalWEC8500/configure# periodic-backupWEC8500/configure/periodic-backup#2 Configure upload ftp/sftp server.o target server_address directory id password servType [ftp | sftp] port[port_no]Parameter DescriptionServer_address Upload server address (ipv4, ipv6)Directory Upload directoryId ftp/sftp idPassword ftp/sftp passwordservType Server type (ftp/sftp)
