Samsung WEC8500 Operation Manual

Also see for WEC8050: Operation manual Operation manual Operation manual Operation manual Maintenance manual

Contents

WEC8500/WEC8050 (APC) Operation Manual v10.1 421©Samsung Electronics AmericaExternal LDAP ServerThe W-EP WLAN system provides a function of interoperating with the external LDAPserver. To use the LDAP function, a separate LDAP server is necessary. Employees canreceive a service after being connected to a specific WLAN (SSID) and going throughauthentication.Since the Active Directory server uses the LDAP protocol, it can link to thewireless LAN system by registering to the external LDAP server. Note: Whenregistering Active Directory server, attribute name for user ID is to be“sAMAccountName”. Therefore, “sAMAccountName” should be input as theKEY ATTRIBUTE.Configuring External LDAP ServerConfiguration using CLITo configure the interoperation with external LDAP, execute the command as follows:1 Go to configure  security  ldap of CLI.WEC8500# configure terminalWEC8500/configure# security ldap2 Enter the IP address of the LDAP server.WEC8500/configure/security/ldap 1# serverIp 10.10.10.13 Enter the value required for LDAP Authentication.WEC8500/configure/security/ldap 1# adminDN “cn=manager,dc=maxcrc,dc=com”WEC8500/configure/security/ldap 1# adminPW “secret”WEC8500/configure/security/ldap 1# baseDN “dc=maxcrc,dc=com”WEC8500/configure/security/ldap 1# keyAttribute uidWEC8500/configure/security/ldap 1# port 368WEC8500/configure/security/ldap 1# searchFilter objectclass=*Configuration using Web UIIn the menu bar of <WEC Main window>, select and then select   <LDAP> in the sub-menus.