WEC8500/WEC8050 (APC) Operation Manual v10.1 461©Samsung Electronics AmericaManaging Traffic PerformanceYou can manage the traffic performance statistics information and accumulated data forthe APC system and the interface of each AP.Managing History InformationWhen the traffic performance information management is enabled, the APC systemcreates history information at every 5 minute. But, if the data server information is notconfigured, the history information is not transmitted to outside although it is created. Bothftp and sftp protocols support on uploading data files.Collecting Information1 Go to the configure mode of the CLI.WEC8500# configure terminalWEC8500/configure#2 Configure the traffic performance information.WEC8500/configure# stats-report enable3 Configure a data server to transmit history information.o stats-report target [IP_ADDRESS] [PATH] [ID] [PASSWORD]port[PORT_NUMBER] serverType[ftp|sftp]Parameter DescriptionIP_ADDRESS IP address of a target serverPORT_NUMBER Port number of a target serverID User ID of a target serverPASSWORD User password of a target serverPATH File storage path of a target serverserverType Target server type (ftp/sftp)4 To check the information of traffic performance informationmanagement, use the ‘show stats-report conf’ command.5 Configure so that the performance information is uploaded to the FTPserver.But, because the default is the ‘start’ status, this step may be skipped.WEC8500/configure# stats-report upload startStopping Information Collection1 Go to the configure mode of the CLI.WEC8500# configure terminal
