WEC8500/WEC8050 (APC) Operation Manual v10.1 383©Samsung Electronics AmericaEnable the operation after authentication and configure .For details on Profile Name> configuration, see the section on 8.7.2Derivation Profile Configuration in this document.Figure 258. WLAN Web Policy Configuration WindowConfiguring Web Authentication on MAC Authentication FailureTo provide the service of Web Authentication on MAC Authentication Failure, the MACAuthentication of security L2 of the WLAN must be enabled and the web policy of L3 andthe web authentication of the captive portal must be configured.Configuration using CLI[WLAN Configuration]To configure Web Authentication on MAC Authentication Failure in the WLAN, executethe command as follows:1 Go to configure WLAN configuration mode of CLI.WEC8500# configure terminalWEC8500/configure# wlan 12 Go to configure WLAN security layer 3 configuration mode ofCLI.WEC8500/configure/wlan 1# securityWEC8500/configure/wlan 1/security# layer3WEC8500/configure/wlan 1/security/layer3#3 Enable the WEB authentication (default: disabled).o web-policy macAuthFailureWEC8500/configure/wlan 1/security/layer3# web-policy macAuthFailure4 Next step, refer to CLI of 8.3.2 Web Authentication.
