UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 105 page image

UniPOS IFS7002 two signal loopsInstruction Manual Page 105Revision 11/01.17 Of 145When you press button and a number is already entered in the Go to field, the field isdeactivated.When you press button and the Go to field is empty, the button effect is ignored.Upon exit of the menu the last checked output receives command for deactivation, if the loop isOn and is initialized.13.8.4. Function DisplayUse the function to check the LCD display of the fire control panel.When you enter the function thefollowing screen appears:When you press buttonthat is in the middle of the display,the check is being started – thedisplay changes its colour from blackto white and then to grey. Eachcolours remains for about 4 s. Afterthe check is completed, the initialscreen appears.13.8.5. Menu ButtonsThe menu is used for check-up and set up of the buttons situated on the LCD display of thecontrol panel.Enter the menu to display:Mode:DAY LOC 15:12:16 Mon 28 Mar 2005Check DisplayYou must see:black, white and grey displayTo start the Checkpush buttonMode:DAY LOC 17:11:22 Mon 28 Mar 2005Check ButtonsPush a button- Exit - SetUp0 1 2 3 4 5 6 7 8 9 С