UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 95 page image

UniPOS IFS7002 two signal loopsInstruction Manual Page 95Revision 11/01.17 Of 14513.6.5.2. External keyboardIf an external keyboard isincluded to the fire control panel, thefollowing screen appears:To edit the text use the buttonshaving symbols – when you press abutton, the symbol appears over theposition of the cursor, and theprevious text and the cursor moveone position to the right.The maximum length of themessage is 40 symbols. If you pressa button after a 40-symbol messageis already entered, the text will not beaccepted and the symbol will not beinserted.Press button “Delete” to delete: The symbol under the cursor, if any; The symbol to the left of the cursor, if there is no symbol under it.Press button or to move the cursor one position to the right or to the left.Use the additional digit keypad to: Insert digits – when the LED „Num” is illuminated; Move the cursor via buttons „4 / ” and „6 / ” (analogically to buttons and ) –when the LED „Num” is extinguished; Delete a symbol via button „Del” (analogically to button „Delete”) – when the LED „Num” isextinguished.The mode of operation of the additional keypad, indicated by the LED „Num” can be changed viabutton „Num Lock”.Button „Caps Lock” alternatively changes the case from lowercase to uppercase (LED „Caps” or„А” illuminate to indicate uppercase).Button „Ctrl” alternatively changes Latin fonts to Cyrillic fonts; the active font is indicated in thebottom section of the display – indicators and .To save a text message press button on the built-in keypad or press button („Enter”)on the external keypad.To exit the screen and revert to upper hierarchy menu use button on the built-in keypad orbutton („Back Space”) on the external keypad.To exit Set Up use button on the built-in keypad or button „Esc” on the external keypad.13.7. Menu InitializationThe menu is used for the settings relevant to initialization of the addressable devices in the firealarm lopps. It contains the following submenus and functions: Function Initialization; Function Clean initialization; Menu Readdressing; Menu Exclude devices; Menu Check. LAT CYR Mode:DAY LOC 11:39:25 Fri 26 Mar 2010SetUp Input Lp1 Аddr19.1Text messageText message 1_LAT