UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 25 page image

UniPOS IFS7002 two signal loopsInstruction Manual Page 25Revision 11/01.17 Of 145Upon Battery Low condition - fulldischarge of the backup batteriesdue to interrupted power supply – thefollowing information screen appears:The screen suppresses all othertext indications, with the exception ofSystem error message, and can notbe suppressed.For all other fault conditions atable, containing information on thenumber of fault events and thenumber of disabled devices isdisplayed. The first line of the tables’left column displays the total numberof fault conditions; the first line of thetable’s right column displays only thenumber of faults in outputs(monitored outputs and addressableoutput devices):To display the text message foreach fault condition, enterInformation and Control Mode (seesection 12.2.1).9.3. Using the keypadNone of the buttons is active upon fatal fault condition. For all other fault condition 2 buttons arebeing supported. Where the fire control panel operates in combination of other conditions, theirbuttons are active too.9.3.1. Button (Stop Alarm)The button appears on the LCD display where the fire control panel enters fire condition in a newzone or a new fault condition occurs; it disappears if pressed or if the sound signaling is suspended(fault conditions suspended and/or fire control panel exited fire condition)Press the button to switch the local sounder off.The button does not affect and is not influenced by the following events: Fire condition in new zone or transition from phase Fire condition stage I to Fire conditionstage II will trigger the local sounder and a signal for fire condition only will be produced; New fault condition will trigger the local sounder and a signal for fault condition only will beproduced.9.3.2. Button (Menu)Press the button to enter Information and Control Mode.Battery lowMode:DAY LOC ActInp 0000FIRE CONTROL PANEL IFS7002UniPOSThu 11 Feb 201011:43:13Faults Total: 00001/00000*Disables Total: 000Failed Outputs: 0000Disabled Outputs: 000