UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 61 page image

UniPOS IFS7002 two signal loopsInstruction Manual Page 61Revision 11/01.17 Of 145The displayed screens have a tree structure of subordinate menus (Appendix 2b). Transition to alower hierarchy menu is performed via button (Enter); to revert to a previous/ upper hierarchymenu use button (Cancel). To move between elements of a single menu use buttons(Up) and (Down) – when the menu appears as ascending window from the left bottom cornerof the screen, or buttons (Move Up) and (Move down) – when the menu appears on a panelin the middle of the screen. To exit the condition use button (Exit) or press repeatedly button(Cancel) until you reach the main menu.The screens provided for parameter changes and command execution (command screens) are ofthe lowest hierarchy. When a screen for parameter changes is activated, a pointer indicating thecurrent parameter, subject to changes, appears. The pointer may be visualized as: a cursor, indicating the position where: a symbol will be inserted – if there is a symbol under the cursor and a text at thecursor’s right side, they will be moved one position to the right; a symbol will be deleted – if there is a symbol under the cursor, it will be deleted; thetext at the right side will be moved one position to the left; if there is no symbol underthe cursor, the symbol to the left will be deleted. an arrow, pointing over the parameter; a text in inversive colours.To move between the parameters use buttons (next parameter) and (previous parameter).When a parameter is changed, in the bottom left section of the panel appears the reminder Data notsaved. To save the changes press button and the reminder Data not saved is cleared.Menu Set Up contains the following subordinate menus and functions: Panel configuration; Panel parameters; Loops; Zones; Inputs; Initialization; Checks; New Passwords; Default parameters; Clear Archive.13.2. Menu Panel configurationThe menu is used to set up: the local network where the control panel is included in: if a local network is available, it can be switched on or off; if no local network is available, set the field to Off and the parameter will not be active; the periphery devices in the control panel: if periphery devices are present they can be switched on or off; if no periphery devices are present, the message None appears in the field and theparameters remains inactive; the power loop – it can be switched On or Off; the language of the messages – language options are Bulgarian or English; Check for earth – it can be swithed On or Off the check for connection between the wires,which exit from the panel wires and grounded metal partd or other wires.