WAGO-I/O-SYSTEM 750 Installing and Removing the I/O-IPC 49758-874/000-131 WAGO-I/O-IPC-C6ManualVersion 1.0.0Pos: 36.22 /Serie 758 (Funk, IPC und PFC)/Montieren/Demontage 758-87x allgemein 2 @ 10\mod_1312441023649_21.doc @ 75856 @ 3 @ 16.6.2 Removing the I/O-IPC from the Mounting RailRemove the I/O-IPC from the mounting rail as described below:1. First, disconnect from the power supply those parts of the system on whichyou have mounted the I/O-IPC.2. Then, pull the orange release tab (24) to remove the first 750 Series I/OModule connected to the I/O-IPC from the mounting rail (A and B).Pos: 36.23 /Serie 758 (Funk, IPC und PFC)/Montieren/Demontage 758-87x 2 Handlung @ 10\mod_1315201214389_21.doc @ 78111 @ @ 13. Press the four release levers (23) with both hands at the same time until theystop and then remove the I/O-IPC from the mounting rail (C).Pos: 36.24 /Serie 758 (Funk, IPC und PFC)/Montieren/Demontage 758-87x - FB Bild 2 @ 10\mod_1312441093558_21.doc @ 75859 @ @ 1………Figure 17: Removing the I/O-IPC from the mounting railPos: 37 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 12424AB2323C
