68 Commissioning WAGO-I/O-SYSTEM 750758-874/000-131 WAGO-I/O-IPC-C6ManualVersion 1.0.0Pos: 41.7 /Serie 758 (Funk, IPC und PFC)/In Betrieb nehmen/In Betrieb nehmen 758-87x allgemein 5 @ 11\mod_1315222596607_21.doc @ 78218 @ 2 @ 18.4 Testing the Network ConnectionTo check whether you can reach the I/O-IPC at the IP address you have assignedin the network, carry out the ping network service. To do this, open the prompt inMS Windows by clicking on the "Start" button and selecting Programs >Execute. Enter cmd in the "Execute" dialog and click [OK].1. Enter the ping command and the IP address of the I/O-IPC in the DOSwindow: Example: ping 192.168.1.100.2. Press the Enter key. Your PC will send a request that will be answered bythe I/O-IPC. The answer appears in the DOS window. If the error message"Timeout" appears, the I/O-IPC has not reported properly. Please checkyour network setting.Figure 29: Example of a functional test3. If the test is completed successfully, close the DOS window.Pos: 41.8 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
