88 Configuration WAGO-I/O-SYSTEM 750758-874/000-131 WAGO-I/O-IPC-C6ManualVersion 1.0.0Table 40: Description of the parameters for the "SNMP" pageSNMP v3 ConfigurationA list of all configured v3 users is indicated here. The number of users is in principle not limitedby the I/O-IPC. You have the opportunity to delete individually configured Users via [DELETE].At the end of the list, you will find a form for compiling a completely new User. Individualconfiguration data of already existing Users cannot be changed.Security Authentication NameUser Name. This must be unique; an already present User nameis not accepted by the new entry.The community name can be up to 32 characters long and maynot include spaces.Authentication TypeAuthentication type for SNMP v3 packages. Possible values are:- Use no authentication ("None")- Message Digest 5 ("MD5")- Secure Hash Algorithm ("SHA")Authentication Key(min. 8 char.)Key string for authentication.The authentication key must be min. 8 characters and max. 32characters without blank characters.PrivacyEncryption algorithm for SNMP Messages. Possible values are:- No encryption ("None")- Data Encryption Standard ("DES")- Advanced Encryption Standard ("AES")Privacy Key(min. 8 char.)Key string for encryption ("privacy") of the SNMP message. Ifnothing is entered here, the “Authentication Key” isautomatically used.The Privacy Key must be min. 8 characters and max. 32characters without blank characters.Notification Receiver IP IP address for a Trap Receiver for v3 Traps. In case no v3 Trapsshould be sent for this user, the field remains empty.9.1.17 I/O ConfigurationOn this page, the I/O module configuration connected to the I/O-IPC is shownwith the process values of the individual I/O modules.Table 41: Description of the parameters on the "I/O Configuration" pageI/O configuration and valesPos Position of the I/O module connected to the I/O-IPC. Passive I/Omodules do not appear in WBM (e.g. 750-600, -602, …).Module Product number of the I/O module or abbreviation.Type Description of which is the I/O module in question (8DI, 4AO, etc.).Channel Specification of the module position and channel number of the I/Omodule.Values Display of the process data at the time of the last update of the "I/OConfiguration" page. To display the current process data, update thepage.
