WAGO-I/O-SYSTEM 750 Configuration 85758-874/000-131 WAGO-I/O-IPC-C6ManualVersion 1.0.09.1.12 "Mass Storage" PageThe "Mass Storage" page provides information about the mass storage mediaavailable for the IPC and can perform different actions in this regard. A separatetable is displayed for each media available.Table 38: Description of the Parameters of the "Mass Storage" PageMass StorageStorage medium/activePartitionThe media is specified in the table overview, i.e. "Internal flash","CF card", "USB1", etc. If active, "Active Partition" appears afterthe media.Device The name of the device in the file system of the operating system.Volume name The name of the storage medium.BootflagA graphic and corresponding text display if the memory isbootable or not. Press the [SET/RESET BOOTFLAG] button toset or reset the bootflag accordingly.The internal flash memory must always be bootable and thereforethe button does not appear.Press the [START FORMATTING] to start formating themedia with (exactly) one partition in FAT32 format.FAT format Medium Delete existing dataAny existing data is deleted when formatting themedia.The currently active partition and the internal flashmemory cannot be formatted. Therefore, the buttondoes not appear.Volume Name The partition of your media just formatted receives this name.Linux uses this name, for example, to mount the partition later.Limited number of USB flash drivesA maximum of 8 USB flash drives connected to the I/O-IPC can be displayed andprocessed. All other USB flash drives are listed/displayed as "Unknown Medium"and cannot be used by the system.9.1.13 "Downloads" PageOn this page, you can search for current fieldbus software, program licenses andupdate scripts using the [Browse…] button in the PC file system and import theminto the I/O-IPC using [Download]. You activate the new data in the I/O-IPC byusing the [Activate] button.
