66 Commissioning WAGO-I/O-SYSTEM 750758-874/000-131 WAGO-I/O-IPC-C6ManualVersion 1.0.0Pos: 41.5 /Serie 758 (Funk, IPC und PFC)/In Betrieb nehmen/In Betrieb nehmen 758-87x 4 @ 11\mod_1315222587717_21.doc @ 78212 @ @ 13. To change the X8 Ethernet interface, select TCP/IP Configuration eth0 orTCP/IP Configuration eth1 for the X9 Ethernet interface. Then press the[Enter] key.In this example, the X8 Ethernet interface is selected to change the pre-setIP address:Figure 26: TCP/IP configuration eth0 (X8)4. Select IP address and press the [Enter] key.Figure 27: IP address