108 5 Control Panel SettingsSetting Example: Changing the Sleep Mode TimerIn this example, we will set the Sleep Mode Timer for operations in common menus to 240minutes.1. Press the panel to display the menu screen.2. Press the < > button until [Admin Menu] isdisplayed.Note• If you went past the desired item, return to the item bypressing the < > button.3. Press the < > or button to select.Move on to the next lower level.Note• If you pressed the < > or button on the wrongitem, return to the previous screen by pressing the< > or the button.• To start over from the beginning, press the button.4. Press the < > button until [SystemSettings] is displayed.5. Press the < > or button to select.Move on to the next lower level.6. Press the < > button until [Sleep ModeTimer] is displayed.7. Press the < > or button to select.The current set value is displayed.8. Press the < > or < > button to display[240 Minutes].Note• Holding down the < > or < > button scrolls throughthe options in a circular fashion.9. Press the button to confirm yourselection.The value is accepted.10. The setting is now complete.Press the [Ready to print] screen.MenuLanguageEmulationMenuAdmin MenuAdmin MenuNetwork/PortAdmin MenuSystem SettingsSystem SettingsAlert ToneSystem SettingsSleep Mode TimerSleep Mode Timer•1 MinutesSleep Mode Timer240 MinutesSleep Mode Timer•240 MinutesReady to printK C M Y
