7.13 Moving the Printer 2677.13 Moving the PrinterUse the following procedure when moving the printer.Important• The machine (including the consumables) weighs 63.0 kg. At least three people should participate inlifting the printer to move it.• When lifting the printer, bend at knees to avoid back injury, grip the printer at the specified handholds,and then lift straight up.• If optional trays are installed, remove them before moving the printer. If trays are not installed securely,they may fall and cause injuries. If trays are not installed securely, they may fall and cause injuries. Forinformation on how to remove the trays, refer to the installation guide provided with the options.1. Switch the power off by pressing the < > side of the power switch.2. Unplug the power cord, interface cable, and all the other cables from the printer.3. Remove the paper from the bypass tray, and close the bypass tray. Re-wrap thepaper and store it away from dust and humidity.4. Pull out the trays from the printer, and remove any paper in them. Re-wrap the paperand store it away from dust and humidity.5. Push the trays all the way back into the printer.6. Lift the printer and carefully move it. If moving over a long distance, pack the printer ina box.Important• When lifting the printer, make sure to follow the precautions at the beginning of this section.
