5.2 Common Menus Setting 121[IPP]TBCP Filter Sets whether to enable or disable the TBCP filter during processing ofPostScript data.• [Disabled] (default)• [Enabled]Network/PortIPPIPPPort StatusIPPPrint ModeIPPPJLIPPAccess ControlIPPDNSIPPAdded Port NumberIPPConnect Time-OutIPPTBCP FilterSetting DescriptionPort Status Sets whether to enable or disable the IPP port at printer start-up.• [Enabled]• [Disabled] (default)Important• If the printer runs out of memory when the port is enabled, the port issometimes automatically disabled. If this happens, either disable unusedports, or change the memory allocation under [Allocate Memory].Print Mode Sets the method of processing data (language emulation).• [Auto] (default)After receiving data from a computer, the printer automatically detects itslanguage emulation and processes the data accordingly. *1 (See P. 171.)• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]After receiving data from a computer, the printer processes the data with theselected print language.• [HexDump]Allows you to view data received from a computer by printing it in ASCII code(hexadecimal format). *3 (See P. 171.)Note• [KS], [KSSM], and [KS5895] appear when the Korea Font ROM (optional) isinstalled.Setting Description
