140 5 Control Panel Settings[Sleep Mode][Sleep Mode Timer][Auto Job History]System SettingsSleep ModeSetting DescriptionSleep Mode Consumes less electricity than the Low Power mode. Set whether or not toenable this feature.• [Enabled] (default)• [Disabled]Note• When [Low Power Mode] is set to [Disabled], [Sleep Mode] cannot be set to[Disabled].Refer to• “2.4 Setting/Exiting the Energy Saver Modes” (P. 47)System SettingsSleep Mode TimerSetting DescriptionSleep Mode Timer Sets the time before the printer enters the Sleep mode. Specify the value from1 to 240 minutes in 1-minute increments. *2 (See P. 171.)• [1 Minutes] (default)Refer to• “2.4 Setting/Exiting the Energy Saver Modes” (P. 47)• “Setting Example: Changing the Sleep Mode Timer” (P. 108)System SettingsAuto Job HistorySetting DescriptionAuto Job History Sets whether or not to automatically print the [Job History Report] on thecompleted print jobs.• [Do not print] (default)Does not automatically print the [Job History Report].• [Print]When memory fills up to its maximum of 50 print jobs, a history of past jobsthat have not been output is automatically output starting with the oldest printjob. Data being printed or queued print data is not recorded in this history.
