5.2 Common Menus Setting 123[EtherTalk Compat][Bonjour]Network/PortEtherTalk CompatEtherTalk CompatPort StatusEtherTalk CompatPJLSetting DescriptionPort Status Sets whether to enable or disable the EtherTalk port at printer start-up.• [Enabled]• [Disabled] (default)Important• If the printer runs out of memory when the port is enabled, the port issometimes automatically disabled. If this happens, either disable unusedports, or change the memory allocation under [Allocate Memory].PJL Sets whether to enable or disable PJL commands that are sent from thecomputer.PJL commands control print jobs, and are required to print jobs using the printdriver. Use of PJL commands allows you to specify the language emulation forthe next job while another language emulation is being processed by theprinter. *5 (See P. 171.)• [Enabled] (default)• [Disabled]Network/PortBonjourBonjourPort StatusSetting DescriptionPort Status Sets whether to enable or disable the Bonjour port at printer start-up.• [Enabled]• [Disabled] (default)Note• To use the Multicast DNS feature, set [Enabled]. To use Bonjour to print onthe detector printer, also enable the LPD port.Important• If the printer runs out of memory when the port is enabled, the port issometimes automatically disabled. If this happens, either disable unusedports, or change the memory allocation under [Allocate Memory].
