5.2 Common Menus Setting 117PJL Sets whether to enable or disable PJL commands that are sent from thecomputer.PJL commands control print jobs, and are required to print jobs using the printdriver. Use of PJL commands allows you to specify the language emulation forthe next job while another language emulation is being processed by theprinter. *5 (See P. 171.)• [Enabled] (default)• [Disabled]Connect Time-Out Sets the time after which data reception is canceled if data is not received.Specify the value from 2 to 3600 seconds in 1-second increments. *2 (SeeP. 171.)• [16 Seconds] (default)TBCP Filter Sets whether to enable or disable the TBCP filter during processing ofPostScript data.• [Disabled] (default)• [Enabled]Port Number Sets the port number from 1 to 65535. *2 (See P. 171.)• [515] (default)Note• Set only unique port numbers.Maximum Sessions Set the maximum number of clients that can connect to the printersimultaneously by LPD. Specify the value from 1 to 10.• [5] (default)Print Queue Sets the print data queue.• [Data Process Order] (default)The printer prints print data in the order that it is processed.• [Job Submit Order]The printer prints print data in the order that it is received.Setting Description
