44 2 Basic OperationControl PanelNo. Name Description1 Indicators In the event of an error, use this to verify the location indicated in an errormessage displayed on the display.2 button Pressing the button takes the printer offline. The lamp is offand printing is not done while the printer is offline. Pressing the buttonagain takes the printer back online (printing enabled).3 Display Displays the status of the printer, menu options, and messages.Refer to• “Control Panel Display” (P. 45)4 Pressed to display the menu screen.5 button/lamp Pressed to exit Energy Saver mode.The lamp lights while the printer is in Energy Saver mode. The lamp flasheswhile the hard disk (option) is being accessed.6 button Pressed to stop printing.7 button Pressed to confirm the menu option selected on the menu screen. This buttonis used also when printing reports/lists.8 < > < > < > < > buttons Pressed to advance to the next menu, item, or option.Note• When using the < > and < > buttons to change the current setting,holding down either button cycles through available settings at high speed.To display a setting’s default value, press < > and < > at the same time.9 button Press this button while the menu screen is displayed to return to the previousitem.10 lamp Blinks or lights when an error occurs.11 lamp Lights when the printer is ready to print.12 button Pressing this button while the mark is on the display will display detailedinformation about some current event.13 buttonPress to perform Secure Print/Sample Set operation.Note• To use the Secure Print/Sample Set feature, the hard disk (optional) must beinstalled.1 2 3 4 513 12 11 10 9 8 7 6
