5.2 Common Menus Setting 127[Port 9100]Network/PortPort 9100Port 9100Port StatusPort 9100Print ModePort 9100PJLPort 9100Connect Time-OutPort 9100Port NumberPort 9100TBCP FilterSetting DescriptionPort Status Sets whether to enable or disable the Port9100 port at printer start-up.• [Enabled] (default)• [Disabled]Important• If the printer runs out of memory when the port is enabled, the port issometimes automatically disabled. If this happens, either disable unusedports, or change the memory allocation under [Allocate Memory].Print Mode Sets the method of processing data (language emulation).• [Auto] (default)After receiving data from a computer, the printer automatically detects itslanguage emulation and processes the data accordingly. *1 (See P. 171.)• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]After receiving data from a computer, the printer processes the data with theselected print language.• [HexDump]Allows you to view data received from a computer by printing it in ASCII code(hexadecimal format). *3 (See P. 171.)Note• [KS], [KSSM], and [KS5895] appear when the Korea Font ROM (optional) isinstalled.PJL Sets whether to enable or disable PJL commands that are sent from thecomputer.PJL commands control print jobs, and are required to print jobs using the printdriver. Use of PJL commands allows you to specify the language emulation forthe next job while another language emulation is being processed by theprinter. *5 (See P. 171.)• [Enabled] (default)• [Disabled]Connect Time-Out Sets the time after which data reception is canceled if data is not received.Specify the value from 2 to 65535 seconds in 1-second increments. *2 (SeeP. 171.)• [60 Seconds] (default)
