82 3 PrintingPrinting PDF Files without Using the ContentsBridge UtilityPDF files can be sent directly to the printer using commands such as lpr instead of theContentsBridge Utility. When printing with commands, the following control panel [PDF]settings become enabled.Refer to• “[PDF]” (P. 110)Note• [2 Sided Printing] appears only when the Duplex unit (option) is installed.• [Layout] does not appear when [PS] is selected for [Process Mode].• When printing using the lpr command, use the lpr command to specify the number of copies. In suchcases, the [Quantity] setting on the control panel becomes invalid. If you do not specify the number ofcopies using the lpr command, the printer assumes 1 set.To print PDF files using lpr command, you must use the control panel or CentreWareInternet Services to enable the printer’s LPD port (default: [Enabled]).Refer to• “[LPD]” (P. 116)Supported Operating SystemsWindows NT 4.0/Windows 2000/Windows XP/Windows Server 2003/Windows VistaPrinting PDF FilesThe following is an example of printing a PDF file from a computer using the lpr command.Note• In the following examples, the bold characters are input characters.• Spaces are indicated with U.ExampleAt the command prompt, enter the command as follows.Example: A command for printing “event.pdf” when the printer’s IP address is192.168.1.100.• Process Mode • Collated• Quantity • Output Size• 2 Sided Printing • Layout• Print Mode • Output Color• PasswordC:\>lprU-SU192.168.1.100U-PUlpUevent.pdf key