154 5 Control Panel Settings[Printer Settings]The [Printer Settings] menu allows you to set paper trays and the Auto Tray Selectionfeature.Note• Refer to “Auto Tray Selection Feature” (P. 104) for more information about the Auto Tray Selectionfeature.[Substitute Tray][Paper Type Mismatch]Printer SettingsSubstitute TraySetting DescriptionSubstitute Tray Sets whether or not to switch to another paper tray if the paper tray selected bythe Auto Tray Selection feature runs out of paper. When using this feature, setthe paper size for the substitute tray.• [Off] (default)Does not substitute the tray, and displays a message prompting to loadpaper into the paper tray.• [Use Larger Size]Switches to another paper tray that contains paper that is one size largerthan the size requested, and prints documents at 100% zoom ratio.• [Use Closest Size]Switches to another paper tray that contains paper of size closest to the sizerequested, and prints documents at a reduced zoom ratio if necessary.• [Select Bypass]Switches to the bypass tray, and prints documents on the paper loaded in thebypass tray.Note• These settings will be overridden by requests sent from computers.Printer SettingsPaperTypeMismatchSetting DescriptionPaperTypeMismatch Sets the action to take when there is no paper tray loaded with the paper typespecified in the print job.• [ConfirmationScreen] (default)The message prompting confirmation of the paper type is displayed.• [Print]The confirmation message is displayed, and the print job is printed using thecurrently loaded paper type.