5.2 Common Menus Setting 169[Init/Delete Data]The [Init/Delete Data] menu allows you to initialize printer settings stored in NV memory,network ports, and hard disk (optional), and delete data such as forms registered on theprinter.Note• Executing initialization returns the settings to their default values.Admin MenuInit/Delete DataInit/Delete DataNVMInit/Delete DataHard DiskInit/Delete DataDelete All DataInit/Delete DataPrint MeterInit/Delete DataJob CountersInit/Delete DataDeleteForm/MacroInit/Delete DataDelete FontInit/Delete DataStored DocumentsSetting DescriptionNVM Initializes the NV memory. All settings return to the defaults when NV memoryis initialized.Note• The NV memory is nonvolatile memory that retains the printer settings evenwhen its power is switched off.Hard Disk Initializes the hard disk (optional).The following data on the hard disk is deleted by initialization: additional fonts,ESC/P, HP-GL, HP-GL/2, and PCL forms, SMB folder, secure print documents,sample set documents, and delayed print documents. Secure print, sample setand delayed print logs are not deleted.Note• This item appears only when the hard disk (optional) is installed.Delete All Data Initializes all data in NV memory and on hard disk (optional). All settings returnto the defaults when NV memory is initialized. The following data on the harddisk is deleted by initialization: additional fonts, HP-GL, HP-GL/2, ESC/P, andPCL forms, SMB folder, secure print documents, sample set documents, anddelayed print documents. Secure print, sample set and delayed print logs arenot deleted.Important• When a hard disk is mounted, it may take approx. 1 hour or more to initializeall data. During initialization, the lamps on the printer's control panel blink. Donot turn the printer off while initialization is in progress.