7.7 Configuring Encryption Settings 2476. Refresh your web browser.7. On the menu on the left, click [Security] > [Certificate Management].The [Certificate Management] screen is displayed.8. Select [Local Device] for [Category] and [IP Sec] for [Certificate Purpose], and thenclick [Display the list].9. Select the check box for the certificate to be set, and then click [Certificate Details].10. Click [Use this certificate].11. A window that prompts you to reboot the printer appears. On the window, click[Reboot Machine].The printer reboots and the settings you configured are reflected.This sets the certificate for IPSec. Next, configure IPSec settings. Jump to step 3 ofthe procedure below. Configuring IPSec SettingsUse CentreWare Internet Services to configure IPSec settings.Note• For details about CentreWare Internet Services setting items, refer to its online help.1. Launch your web browser and access CentreWare Internet Services.Note• If you do not know how to access CentreWare Internet Services, refer to “1.6 Configuring the PrinterUsing CentreWare Internet Services” (P. 35).• If you are prompted to enter the administrator's ID and password, enter them and click [OK].2. Click the [Properties] tab.