11z BACKTRACK ScreenEither the backtrack screen or the GPS information screen that was displayed last willbe displayed.•Real-time navigation functionTouch [ ] at the top left of the screen to display the position and direction of thepartner station in real time during communication in C4FM digital V/D mode. (The sig-nal of the partner station must contain location information.)•BACKTRACK functionMay be register the departure point etc. up to 3 places (“H”, “L1”, “L2”) in advanceand display the distance from the current location to the registered point in real time.JA1YOE-123Touch the screen (other than the Touch keys)z GPS ScreenThe backtrack screen, or the GPS information screen, whichever was displayed last, willbe displayed.The GPS satellites status and numbers are shown.The following information is displayed.• Direction and elevation of satellites, and their signalstrengths• Current latitude and longitude• Moving Speed• Altitude of current locationz Band Scope ScreenIn VFO mode, the Band Scope searches the channels above and below the center re-ceive frequency at high speed. The signal strengths are displayed on a graph, so thepresence or absence of a signal on any channel is easily noted.• The frequency may be changed by turning the DIALknob.• Touch [SEARCH] or [STOP] to begin or stop thesearch.• The number of channels to search in Band Scope maybe set to 19, 39 or 79. (See “Setting the Search Chan-nel for the BAND SCOPE Function” (page 63)).
